Proware SB-2124-G1S3

iSCSI - SAS/SATA iSCSI RAID 2U 12 bay

Overview

The Proware SB-2124 RAID subsystem features iSCSI host connectivity using 4x 1 Gigabit Ethernet ports to increase system efficiency and performance. It features 12 hot-swappable SAS/SATA II hard disk drive bays in a 19-inch 2U rackmount unit and supports the latest 2TB disk drives.

Features

  • Supports iSCSI jumbo frame
  • Local N-way mirror: Extension to RAID 1 level, N copies of the disk
  • Global and dedicated hot spare disks
  • Write-through or write-back cache policy for different application usage
  • Dedicated or shared cache allocation for volume usage
  • Supports greater than 2TB per volume set (64-bit LBA support)
  • Supports manual or scheduling volume snapshot (up to 32 snapshot)
  • On-line volume migration with no system down-time.
  • Online volume expansion
  • Instant RAID volume availability and background initialization
  • Supports S.M.A.R.T, NCQ and OOB Staggered Spin-up capable drives
Proware
Proware SB-2124-G1S3

VMware Ready

Datasheet

Advanced Features

Proware SB-2124-G1S3 Specifications


Model
SB-2124-G1S3
Form-factor
2U 19-inch rackmount chassis
RAID processor
Intel IOP342 64-bit
RAID level
0, 1, 0+1, 3, 5, 6, 10, 30, 50, 60 and JBOD
N-way mirror (N copies of the disk)
Cache memory
512MB ~ 2GB DDR II
No. of channels (host+drive)
4 + 12
Host bus interface
1Gb/s Ethernet
Drive bus interface
3Gb/s SAS / SATA II
Hot-swap drive trays
Twelve (12) 1-inch trays
Host access control
Read-Write & Read-Only
Maximum logical volume
up to 1024
Maximum host connection
up to 32
Maximum host clustering
up to 16 for one logical volume
Manual/scheduling volume snapshot
up to 32
Supports CHAP authentication
Yes
802.3ad port trunking,
LACP support
Yes
Jumbo frame support
Yes
Snapshot rollback mechanism support
Yes
Supports Microsoft Multipath I/O (MPIO)
Yes
Supports Microsoft Windows Volume Shadow Copy Service(VSS)
Yes
Global/dedicated cache configurable by volume
Yes
Global and dedicated
hot spare disks
Yes
Online Volume migration
Yes
Online Volume sets expansion>
Yes
Configurable RAID stripe size
Yes
Instant RAID volume availability and background initialization support
Yes
Supports over 2TB per volume
Yes
Online consistency check
Yes
Bad block auto-remapping
Yes
S.M.A.R.T. support
Yes
New disk insertion / removal detection
Yes
Auto volume rebuild
Yes
Array roaming
Yes
Audible alarm
Yes
Password protection
Yes
UPS connection
Yes
Hot-swap power supplies
Two (2) 350W power supplies w/PFC
Cooling fans
2
Battery backup
Option
Power requirements
AC 90V ~ 264V Full Range, 8A ~ 4A, 47Hz ~ 63Hz
Environmental
 
Relative Humidity
10% ~ 85% Non-condensing
Operating Temp
10°C ~ 40°C (50°F ~ 104°F)
Physical Dimensions
88(H) x 482(W) x 650(D)mm
Weight
13.5 kgs (without drives)