Proware SB-3163S-S3S3

3U/16 bays, SAS - SAS / SATA RAID Subsystem

Overview

The Proware SB-3163S-S3S3 3U rackmount SAS to SAS / SATA RAID .

Redundant flash image for high availability

  • SAS interface supports both SAS disk drives, with advanced enterprise level reliability and functionality, for data-intensive application and SATA disk drives for low-cost bulk storage of reference data
  • Features the 4x mini SAS port for external JBOD expansion
  • Using Intel newest IOP for optimum RAID performance

Unsurpassed Data Availability

  • Advanced Data Guarding technology(RAID ADG) provides the highest level of data protection
  • RAID ADG can tolerate two simultaneous drive failures without downtime or data loss

Exceptional Manageability

  • The firmware-embedded Web Browser-based RAID manager allows local or remote management
    and configuration
  • The firmware-embedded SMTP manager monitors all system events and user notification automatically
  • The firmware-embedded SNMP agent allows remote to monitor events via LAN with no SNMP agent required
  • Menu-driven front panel display
  • Innovative Modular architecture
Proware
Proware SB-3163S-S3S3

Features

Specification

Model
SB-3163S-S3S3
SB-3163S-F4S3
Form-factor
3U 19-inch rackmount chassis
RAID Controller
Intel IOP341 64-bit
RAID level
0,1,0+1,3,5,6,30,50,60 and JBOD
Cache memory
512MB ~ 2GB DDR2 SDRAM
Host bus interface
Two 4x Mini SAS (3Gb/s)
FC-AL (4 Gb/s) per port
Drive bus interface
SAS or 3Gb/s SATA II
Data transfer rate
Up to 300MB/sec per channel
Up to 400MB/sec per channel
Expansion
One 4x mini SAS (SFF-8088)
Controller Redundancy
Option
Hot-swap drive trays
Sixteen (16) 1-inch trays
Online capacity expansion, RAID level / stripe size migration
YES
Online Volume sets expansion
YES
Online Array roaming
YES
Online consistency check
YES
SMTP manager and SNMP agent
YES
E-mail Notification
YES
Redundant Flash image
YES
R-Link support
YES
Support over 2TB per volume
YES
Instant availability and background initialization
YES
S.M.A.R.T. support
YES
New disk insertion / removal detection
YES
Failed drive auto rebuild
YES
Continuous rebuild
YES
Multiple RAID selection
YES
Bad block auto-remapping
YES
Audible alarm
YES
Password protection
YES
UPS connection
YES
SES2 enclosure management
YES
Hot-swap power supplies
YES
Cooling fans
4
Battery backup
Option
Power supplies
Two(2) 460W power supplies w/PFC
Power requirements
AC 90V ~ 264V Full Range 8A ~ 4A, 47Hz ~ 63Hz
Environmental
Relative Humidity
10% ~ 85% Non-condensing
Operating Temp
10oC ~ 40oC (50oF ~ 104oF)
Physical Dimension
133(H) x 482(W) x 600(D)mm
Weight (Without Disk)
24.7kgs/54.34Lbs