1U/4 bays, U320 SCSI to SATA II RAID subsystem
Proware 4 disk bay rackmount SATA RAID storage with Ultra 320 SCSI interface, provides hard disk fault tolerance within a small 1U package.
|
Features
|
 |
Supports hot spare and automatic hot rebuildHost-to-Drive Interface |
Configuration |
Model |
Form Factor |
SCSI-320 to SATA-II |
Dual SCSI |
SB-1403E-SA3 |
1u |
RAID Management
- Smart-function LCD display
- Environmental monitoring unit
- Real time drive activity and status indicators
- Browser-based Java GUI management utility
RAID Function
- New disk auto spare
- Host independent
- Environment monitor
- Online expansion
- Continuous rebuild
- Online consistency check
- Failed drive auto rebuild
- Failed drive indicators
- Audible alarm
- Password protection
- UPS connection
- Bad block auto-remapping
Specifications
Model |
SB-1403E-SA3 |
Form-factor |
1U 19-inch rackmount chassis |
RAID processor |
Intel 80219 64bit RISC |
RAID Level |
0,1,3,5,0+1,6,JBOD |
Cache memory |
128MB ~ 256MB |
No. of channels (host+drive) |
1 + 4 |
Host bus interface |
Ultra 320 LVD |
Drive bus interface |
SATA II |
Data transfer rate |
Up to 320MB/Sec |
Back plane board |
SATA II |
Hot-swap drive trays |
Four (4) 1-inch trays |
Power supply |
250W power supply w/PFC |
Cooling fans |
1 |
Power requirements |
AC 100V ~ 240V Full range 6A / 3A, at 115V / 230V, 47Hz~63Hz |
Environmental |
|
Relative Humidity: |
10% ~ 85% Non-condensing |
Operating Temp: |
10°C ~ 50°C (50°F ~ 122°F) |
Physical Dimensions: |
44(H) x 449(W) x 580(D)mm 1.7(H) x 17.6(W) x 22.8(D)inches |
Weight |
12kgs / 26.4Lbs (without drives) |
