Proware SB-3163S-S3S3 SAS - SAS RAID

3U/16 bays, SAS - SAS - SAS / SATA RAID Subsystem

SAS - SAS RAID

Datasheet

Features
- Supports RAID levels 0, 1, 0+1, 3, 5, 6, 30, 50, 60 and JBOD
- Supports online Array roaming
- Online RAID level/stripe size migration
- Online capacity expansion and RAID level migration simultaneously
- Online Volume Set Expansion
- Supports multiple array enclosures per host connection
- Supports greater than 2TB per volume set (64-bit LBA support)
- Supports 4K bytes/sector for Windows up to 16TB per volume set
- Supports up to 128 LUNs per RAID set
- Transparent data protection for all popular operating systems
- RAID ADG provides the highest level of data protection
- Instant availability and background initialization
- Supports S.M.A.R.T, NCQ and OOB Staggered Spin-up capable drives
- Local audible event notification alarm.
- Supports password protection and UPS connection
- Serial port interface for remote event notification
- Redundant flash image for high availability

Specification

Model
SB-3163S-S3S3
SB-3163S-F4S3
Form-factor
3U 19-inch rackmount chassis
RAID Controller
Intel IOP341 64-bit
RAID level
0,1,0+1,3,5,6,30,50,60 and JBOD
Cache memory
512MB ~ 2GB DDR2 SDRAM
Host bus interface Two 4x Mini SAS (3Gb/s) FC-AL (4 Gb/s) per port
Drive bus interface
SAS or 3Gb/s SATA II
Data transfer rate Up to 300MB/sec per channel Up to 400MB/sec per channel
Expansion
One 4x mini SAS (SFF-8088)
Controller Redundancy
Option
Hot-swap drive trays
Sixteen (16) 1-inch trays
Online capacity expansion, RAID level / stripe size migration
Yes
Online Volume sets expansion
Yes
Online Array roaming
Yes
Online consistency check
Yes
SMTP manager and SNMP agent
Yes
E-mail Notification
Yes
Redundant Flash image
Yes
R-Link support
Yes
Support over 2TB per volume
Yes
Instant availability and background initialization
Yes
S.M.A.R.T. support
Yes
New disk insertion / removal detection
Yes
Failed drive auto rebuild
Yes
Continuous rebuild
Yes
Multiple RAID selection
Yes
Bad block auto-remapping
Yes
Audible alarm
Yes
Password protection
Yes
UPS connection
Yes
SES2 enclosure management
Yes
Hot-swap power supplies
Yes
Cooling fans
Two(2) 460W power supplies w/PFC
Battery backup
4
Power requirements
Option
Environmental
AC 90V ~ 264V Full Range 8A ~ 4A, 47Hz ~ 63Hz
Relative Humidity
10% ~ 85% Non-condensing
Operating Temp
10oC ~ 40oC (50oF ~ 104oF)
Physical Dimension
133(H) x 482(W) x 600(D)mm
Weight (Without Disk)
24.7kgs/54.34Lbs